cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
202
Views
0
Helpful
1
Replies
Highlighted
Beginner

VIC 1457 Port channel configuration with C3850

Hi Team,

 

We manage the UCS-C240 server with VIC1457 card in standalone mode.

 

VIC 1457 have four ports that can be setup in two operating modes

1) Individual link (4 ports)

2) Port channel mode

When i use port channel mode then port pair are created 1/2 and 3/4. 

Do you know what is the protocol for such port channel ? 

On the switch no LACP is workin - only static mode ON getting the link UP.

If the VIC1457 support LACP in port channel mode or this is only static cofiguration ?

 

Thanks,

1 REPLY 1
Highlighted
VIP Mentor

Re: VIC 1457 Port channel configuration with C3850

I had same issue when i was doing some testing with VIC card, not the same model.

it could not work with LACP for some reason, i have to go with Mode ON

 

one of the thread for your reference  :

 

https://208.74.205.244/t5/server-networking/vic-1457-in-stand-alone-c240-m5/td-p/3898525

 

here is some reference guide :

 

https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKINI-2812.pdf

 

BB
*** Rate All Helpful Responses ***
CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey