VIC 1457 Port channel configuration with C3850

[lukasz4]

Hi Team,

We manage the UCS-C240 server with VIC1457 card in standalone mode.

VIC 1457 have four ports that can be setup in two operating modes

1) Individual link (4 ports)

2) Port channel mode

When i use port channel mode then port pair are created 1/2 and 3/4. 

Do you know what is the protocol for such port channel ? 

On the switch no LACP is workin - only static mode ON getting the link UP.

If the VIC1457 support LACP in port channel mode or this is only static cofiguration ?

Thanks,

[balaji.bandi]

I had same issue when i was doing some testing with VIC card, not the same model.

it could not work with LACP for some reason, i have to go with Mode ON

one of the thread for your reference  :

https://208.74.205.244/t5/server-networking/vic-1457-in-stand-alone-c240-m5/td-p/3898525

here is some reference guide :

https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKINI-2812.pdf