04-24-2024 03:44 PM
We have 2 SG350x-48 switches in a stack. and we need to add another switch. but I know that SG350x-48 is no longer sold. what are my options? these were replaced by the "Cisco Business 350 Series Managed Switches". can one of these switches be added into the stack? or do I need to replace the entire stack? Or buy a used SG350x-48 switch? other options?
Thanks
Solved! Go to Solution.
04-24-2024 10:39 PM
>... can one of these switches be added into the stack?
- No ,
>...Or buy a used SG350x-48 switch?
Best advice ,
M.
04-24-2024 10:39 PM
>... can one of these switches be added into the stack?
- No ,
>...Or buy a used SG350x-48 switch?
Best advice ,
M.
04-24-2024 11:58 PM
Stacking Guide lines - until it states any where otherwise - hardware models and Firmware and IOS code should be same.
you are not worried about support - for temporary fix you can buy refurbished same model and join to stack.
when you have budget - replace with better model is wise for commercially and operationally.
04-25-2024 08:39 AM
Thank you. I'll have to check for a used switch.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide