11-23-2022 11:32 AM
hello, we require a 1 GB switch with minimum 6 SFP and 8 Gigabit ethernet
I was looking at the Small Business 350 series but could not find anything?
I need to connect single mode fiber using LC connector.
I also need to connect my firewall using 1 GB Ethernet.
Do we have recomendation on somethign that will work?
11-23-2022 03:39 PM
There is some model before 550 SMB switch (but end of life)
https://www.cisco.com/c/en/us/products/switches/550x-series-stackable-managed-switches/index.html
For that range, you can look Meraki switch
https://meraki.cisco.com/product/switches/stackable-access-switches/ms390-48/
In long run, I would look Cat 9K switches.
you can compare models:
https://www.cisco.com/c/en/us/products/switches/switch-selector.html?ccid=cc000098&oid=otres000315
11-23-2022 05:03 PM
48 port is too much
what about
CBS350-24S-4G-NA |
Thoughts?
11-24-2022 12:12 AM
Those models did not get the 6 SFP that you looking....also they coming end of life soon I guess.
if you have 4 SFP, then you have a choice more, only higher models have 6 SFP ports
look at Meraki, they have also gotten a dashboard from the cloud to manage devices.
11-24-2022 10:57 PM
Hi,
You may check the model CBS350-16XTS if that fits your requirements.
More details for that CBS350-16XTS switch model are available on the data sheet https://www.cisco.com/c/en/us/products/collateral/switches/business-350-series-managed-switches/datasheet-c78-744156.html
11-25-2022 07:29 AM
Are SFP+ ports backward compatible with 1G SFP optics?
11-28-2022 02:08 AM
Hi,
As per the CBS350 series switch admin guide, the SFP+ ports are compatible with the Cisco SFP 1G optical modules MGBSX1, MGBLX1, MGBLH1 and MGBT1.
You may refer the admin guide link https://www.cisco.com/c/en/us/td/docs/switches/lan/csbms/CBS_250_350/Administration-Guide/cbs-350.pdf
Page - 11 (13 of 424)
11-27-2022 05:00 AM
To get 6 SFP you need to move to the 10GB switches. You can use these with SFPs or SPF+s
CBS350-16XTS would be the smallest (8 copper, 8 SFP+). 24XTS next up (12/12)
11-28-2022 06:59 AM - edited 11-28-2022 07:37 AM
it turns out we only require 3 SFP. the other connections can be copper. so, any switch with 4 SFP uplink module should do the trick .i was looking at the Meraki MS120-24P. (Especially since lead times on ordering is like 1 days.)
11-29-2022 01:38 AM
Meraki is good option for this
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: