07-01-2019 06:19 AM
Dear All,
our 2960X Switches (15.2(2)E9) only send syslogs in case a stack member gets lost but no SNMP traps as a deep dive into the tcpdump flows has revealed.
Is there a way to change this behavior and to make sure Catalyst 2960X and 2960S Switches will send SNMP traps for the event of a stack member getting lost (CEFC RFU REMOVED) ?
The Catalyst Switch is configured for sending this kind of SNMP traps to Cisco Prime but still will only send this information out as as syslog:
snmp-server enable traps fru-ctrl
snmp-server enable traps stackwise
snmp-server host <Cisco Prime Server IP> version 2c <community> mac-notification
Thanks for your help.
07-01-2019 09:18 AM
You can try below one :
snmp-server enable traps stackwise member-removed
07-01-2019 11:26 PM
Hi
Thanks but does snmp-server enable traps stackwise not include member-removed ? As far as I understand if I add "member-removed" I will only get alerts for member-removed and no other stackwise events.
Thanks.
T.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide