09-30-2013 07:56 AM - edited 03-07-2019 03:45 PM
Hi There,
Does anyone have a link to an overview of the Port to Asic configuration of the Cisco Catalyst 4500-X
I was watching a recorded cisco live presentation and the attached slide came up. (look at bullet point 4)
Unfortunately the presenter did not talk at all about that bullet point.
I really want to know which ports groups are bundeld to which asic.
09-30-2013 08:24 AM
Hi,
you can view this presentation - BRKARC-3446 - Cisco Catalyst 4500-X Switch Architecture (2012 San Diego) - at www.ciscolive365.com:https://www.ciscolive365.com/connect/sessionDetail.ww?SESSION_ID=4132
To view registration is required, but it is free and it will not take much of your time ...In any case, I will attached the slide with the information you are interested in...
05-01-2018 01:28 PM
This link no longer works.
Can anyone share the entire presentation to me?
kc6alg@gmail.com
Thanks,
rickr
01-31-2019 12:56 PM
Hi
could you please sent me this hole presentation BRKARC-3446
thank you very much
ladoninikashvili@gmail.com
05-28-2019 02:50 PM
09-30-2013 08:32 AM
Besides the presentation (good link), you can also use the command "show platform mapping ports"
Look at the "portset" column in the resultant output:
#show platform mapping ports
Executing the command on VSS member switch role = VSS Active, id = 1
Interface Superport Subport CompactSubportId PortSet Phyport Aggport PimPhyport
Te1/1/1 60 0 12 15 12 56 48
Te1/1/2 61 0 14 15 14 Po20(852) 49
Te1/1/3 66 0 16 17 16 58 50
Te1/1/4 67 0 18 17 18 59 51
Te1/1/5 68 0 20 18 20 60 52
Te1/1/6 69 0 22 18 22 61 53
Te1/1/7 70 0 24 19 24 62 54
Te1/1/8 71 0 26 19 26 63 55
Te1/1/9 44 0 28 11 28 64 56
Te1/1/10 45 0 30 11 30 65 57
Te1/1/11 56 0 32 14 32 66 58
Te1/1/12 57 0 34 14 34 67 59
Te1/1/13 52 0 36 13 36 68 60
Te1/1/14 53 0 38 13 38 69 61
Te1/1/15 64 0 40 16 40 Po1(833) 62
Te1/1/16 65 0 42 16 42 Po1(833) 63
Te1/1/17 32 0 44 8 44 72 64
Te1/1/18 33 0 46 8 46 73 65
Te1/1/19 36 0 48 9 48 74 66
Te1/1/20 37 0 50 9 50 75 67
Te1/1/21 40 0 52 10 52 76 68
Te1/1/22 41 0 54 10 54 77 69
Te1/1/23 48 0 56 12 56 78 70
Te1/1/24 49 0 58 12 58 79 71
09-30-2013 08:50 AM
Thanks, both your replies were very helpfull
09-30-2013 09:23 AM
You're welcome. Please rate helpful replies and/or mark your question as answered to help improve community content.
10-30-2019 08:09 AM
Thanks for the command
But which column in the output shows the ASIC number?
WS-C4500X-32__1#show platform mapping ports Interface Superport Subport CompactSubportId PortSet Phyport Aggport PimPhyport Te1/1 60 0 8 15 12 56 48 Te1/2 61 0 10 15 14 57 49 Te1/3 66 0 12 17 16 58 50 Te1/4 67 0 14 17 18 59 51 Te1/5 68 0 16 18 20 60 52 Te1/6 69 0 18 18 22 61 53 Te1/7 70 0 20 19 24 62 54 Te1/8 71 0 22 19 26 63 55 Te1/9 44 0 24 11 28 64 56 Te1/10 45 0 26 11 30 Po3(91) 57 Te1/11 56 0 28 14 32 Po3(91) 58 Te1/12 57 0 30 14 34 67 59 Te1/13 52 0 32 13 36 68 60 Te1/14 53 0 34 13 38 69 61 Te1/15 64 0 36 16 40 70 62 Te1/16 65 0 38 16 42 71 63 Te1/17 32 0 40 8 44 72 64 Te1/18 33 0 42 8 46 73 65 Te1/19 36 0 44 9 48 74 66 Te1/20 37 0 46 9 50 75 67 Te1/21 40 0 48 10 52 76 68 Te1/22 41 0 50 10 54 77 69 Te1/23 48 0 52 12 56 78 70 Te1/24 49 0 54 12 58 79 71 Interface Superport Subport CompactSubportId PortSet Phyport Aggport PimPhyport Te1/25 16 0 56 4 60 80 72 Te1/26 17 0 58 4 62 81 73 Te1/27 20 0 60 5 64 82 74 Te1/28 21 0 62 5 66 83 75 Te1/29 24 0 64 6 68 84 76 Te1/30 25 0 66 6 70 85 77 Te1/31 28 0 68 7 72 86 78 Te1/32 29 0 70 7 74 87 79 Interface Superport Subport CompactSubportId PortSet Phyport Aggport Cpu phyport 72 0 0 20 4 Cpu aggport(0) Cpu phyport 72 1 0 20 5 Cpu aggport(1) Cpu phyport 72 2 2 20 6 Cpu aggport(2) Cpu phyport 72 3 2 20 7 Cpu aggport(3) Cpu phyport 72 4 4 20 8 Cpu aggport(4) Cpu phyport 72 5 4 20 9 Cpu aggport(5) Cpu phyport 72 6 6 20 10 Cpu aggport(6) Cpu phyport 72 7 6 20 11 Cpu aggport(7)
The column PortSet lists ASIC numbers. I did some sorting etc and total unique numbers for front panel ports were 16, which means two font panel ports are mapped to one ASIC
But the ASIC numbers start from 4 and goes upto 19 for front panel ports? does anyone know why, is it because of how it is on this platform?
ASIC number 20 is shown against Cpu phyport
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide