04-17-2012 12:26 PM - edited 03-07-2019 06:10 AM
I am trying to configure redundancy with SSO and I need to get the same IOS on both supervisors. My issue is that I get an error when I try to copy the IOS from either the sup-bootdisk or the disk0 to the slavesupbootdisk. The Error is Invalid argument.
I have tried also to tftp to the slavesupbootdisk and get the same result.
thanks,
Carl
04-17-2012 12:51 PM
Are those valid options on your box , sometimes it is sup-bootflash: .
04-17-2012 12:55 PM
Yes I did try that also.
04-17-2012 01:05 PM
Can you copy from the primary sup's disk0 to primary sup-bootdisk?
If you are having issue with copy, load the IOS using one sup at the time. Once you are done with both sups, reboot the switch. it should comes up in sso mode now. Don't forget to add the SSO command to the primary before rebooting
HTH
04-17-2012 01:58 PM
Hi,
Depending upon the type of your Sup you should use either "slavesup-bootflash:" or "slavesup-bootdisk:".
Best regards,
Antonin
04-17-2012 02:39 PM
Invalid argument????
Can you post the command you are trying to do?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide