Switching

Dear Experts!!!!I configured cisco 1941 router for Normal NATing and Its working fine. All my internal users are getting internet,But here the issue is, my client using Polycom video conferencing solution. They installed these solution in  different ...

I have a very simple setup I am trying to get with my 1941W.Gig0/0 is my WAN port tied to a Comcast Business connection - No issuesGig0/1 is my internal LAN connection, private IP, dhcp - No issuesGig0/1 is connected to a 24 port PoE switch via ether...

Hi Friends ,                      I wanted to create a vlan in my office network                 Where  Vlan 10 name Marketing 192.168.5.0                             vlan 20 ERP User 192.168.6.0                             vlan 30 HR 192.168.7.0    ...

Hello Experts,I am a newby in Cisco world.My question may be a very fundamental one, but I couldn't find any reasonable and satisfactory answer in the web.One of the port on a 3750 stack that is connected to the edge switch is confıgured as in the fo...

Hi Doing some research I was able to compare these two brand ProCurve 5372xl and Catalyst 3570-EBut...Could you share your experiance and tell me what major difference are between theese two devices and what stnads for HP ProCurve except good price t...

Problems in interface vlan remappingI have 2 Nexus 5010 in HA, managing 5 Sw 2148.I require to change interfaces that are in VLAN 10 to VLAN 280, but when I switch vlan i lose connectivity between servers.even change the server address to a new segme...

Hi NetproUDLD and Loopguard should be configured and tuned  globaly in every switch in network (CORE/Access)am i right? what is the pros and cons for thatthanks

I am deploying a 2 Nexus 7K in VPC mode.I have configured an OSPF(transit VLAN)  peering over the VPC-Peer-Link.The design ensures that traffic will not cross VPC pee-link and exit through another VPC. But you never know in the future. I am consideri...

Hi NetproWhy we need server Farm switch?all what i see in my life server connected directly to core?pls what is the pros and cons?thanks

HI,I have a very generic setup right now, it is like this:asa --> catalyst switch --> wani need to put a proxy server between the switch and the firewall and it supports ospf (it's not cisco so no eigrp), i have 2 asa's and 2 switches but only 1 prox...