11-24-2010 11:51 AM - edited 03-06-2019 02:12 PM
Guys,
I have my 7912 phone connected to the CME and it gets IP I can make calls, etc. I now wish to connect the phone to the PC but I can't seem to get an IP. Can someone see what I'm doing wrong here.
----- show int f0/1/1 switchp
Name: Fa0/1/1
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: Disabled
Access Mode VLAN: 0 ((Inactive))
Trunking Native Mode VLAN: 1 (default)
Trunking VLANs Enabled: ALL
Trunking VLANs Active: 1,20-22,100
Priority for untagged frames: 0
Override vlan tag priority: FALSE
Voice VLAN: 22
Appliance trust: none
----- Show Run
!
interface FastEthernet0/1/1
switchport access vlan 21
switchport mode trunk
switchport voice vlan 22
spanning-tree portfast
!
interface Vlan21
ip address 192.168.21.253 255.255.255.0
ip helper-address 192.168.20.8
h323-gateway voip bind srcaddr 192.168.21.253
!
interface Vlan22
ip address 192.168.22.253 255.255.255.0
ip helper-address 192.168.20.8
!
---- Show IP Int brief
Vlan21 192.168.21.253 YES NVRAM up up
Vlan22 192.168.22.253 YES NVRAM up up
All help appreciated.
Thanks
Solved! Go to Solution.
11-24-2010 11:38 PM
Hi
Can you configure the switch port mode as access instead of trunk?
regds
11-24-2010 11:38 PM
Hi
Can you configure the switch port mode as access instead of trunk?
regds
11-25-2010 07:37 AM
!
interface FastEthernet0/1/1
switchport access vlan 21
switchport mode trunk
switchport voice vlan 22
spanning-tree portfast
!
If I take out the trunk and have only
!
interface FastEthernet0/1/1
switchport access vlan 21
switchport voice vlan 22
spanning-tree portfast
!
The phone neither the computer gets an IP. The phone gets an IP if we have
!
interface FastEthernet0/1/1
switchport access vlan 22
spanning-tree portfast
!
This also allows the computer to get an IP but the computer IP is within the voice subnet IP and I don't want this. Do I have to do any configuration on the phone to ensure it allows the computer on its eithernet port as in assign the switch's PC port to the VLAN I wish the computer to be in?
Thanks for your assistance
11-25-2010 08:20 AM
OK. I moved the configuration to the actual switch which I will be connected to and it is working the way it should. You were correct, there was no need for the port to the phone to be a trunk.
Thanks for the assistance
!
interface FastEthernet0/21
switchport access vlan 21
switchport voice vlan 22
no logging event link-status
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
mls qos trust cos
no snmp trap link-status
auto qos voip trust
spanning-tree portfast
!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide