11-21-2022 04:27 AM
I have a stack switches with v-mismatch on H/W version (V01 and V05). All switches are in install mode
How compatible are then with each other?
switch#sh platform
Role Mac Address Priority Version State
----------------------------------------------------------
1 Active 1111.1111.1110 15 V05 Ready
2 Standby 1111.1111.111a 13 V01 Ready
3 Member 1111.1111.111b 11 V01 Ready
4 Member 1111.1111.111c 9 V01 Ready
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 53 C9300L-48P-4X 17.06.03 CAT9K_IOSXE INSTALL
2 53 C9300L-48P-4X 17.06.03 CAT9K_IOSXE INSTALL
3 53 C9300L-48P-4X 17.06.03 CAT9K_IOSXE INSTALL
4 53 C9300L-48P-4X 17.06.03 CAT9K_IOSXE INSTALL
----------------------------------------------------------
11-21-2022 04:55 AM
- They are compatible,
M.
11-21-2022 06:23 AM
you can stack them together.
11-21-2022 06:48 AM
thanks. Is there a Cisco release note or other document that confirms this?
11-21-2022 09:40 AM
mainly compatibility depends on device model and OS version.
11-22-2022 01:16 AM
hanks. Hardware model and software is identical as above. Only v-mismatch on H/W version (V01 and V05) in stacking.
Is there a Cisco release note or other document that confirms that v1 and v5 are compatible in stacking mode?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide