Basic QoS for RTP

[John Zack]

Hi guys, our issue probably is very simple, we use sdi over fiber units (actually they come with ethernet channel and we use it), so we use ethernet channel for RTP video streaming, from fiber receiver it goes to our lan network, we would like to set highest priority for RTP protocol for all our switches, we use Small Business 220 Series. Or maybe video protocolshave high priority by default? Thank you!

[Dennis Mink]

is this inconjunction with cucm?  in which case you can trust the DSCP values the phones use for RTP and signalling (SIP?SCCP) by setting up trust statements on your access ports

Please rate if this helps

[Ganesh Hariharan · Accepted solution]

Hi guys, our issue probably is very simple, we use sdi over fiber units (actually they come with ethernet channel and we use it), so we use ethernet channel for RTP video streaming, from fiber receiver it goes to our lan network, we would like to set highest priority for RTP protocol for all our switches, we use Small Business 220 Series. Or maybe video protocolshave high priority by default? Thank you!

Hi,

Have look on the below configuration example for more clarification and understanding..

http://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/qos_solutions/QoSVoIP/QoSVoIP.html

Hope it Helps..

-GI

[John Zack]

acually it solved our issue, thanks a lot!