cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1632
Views
0
Helpful
3
Replies
Highlighted
Beginner

Basic QoS for RTP

Hi guys, our issue probably is very simple, we use sdi over fiber units (actually they come with ethernet channel and we use it), so we use ethernet channel for RTP video streaming, from fiber receiver it goes to our lan network, we would like to set highest priority for RTP protocol for all our switches, we use Small Business 220 Series. Or maybe video protocolshave high priority by default? Thank you!

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Hi guys, our issue probably is very simple, we use sdi over fiber units (actually they come with ethernet channel and we use it), so we use ethernet channel for RTP video streaming, from fiber receiver it goes to our lan network, we would like to set highest priority for RTP protocol for all our switches, we use Small Business 220 Series. Or maybe video protocolshave high priority by default? Thank you!

Hi,

Have look on the below configuration example for more clarification and understanding..

http://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/qos_solutions/QoSVoIP/QoSVoIP.html

Hope it Helps..

-GI

View solution in original post

3 REPLIES 3
Highlighted
Advisor

is this inconjunction with cucm?  in which case you can trust the DSCP values the phones use for RTP and signalling (SIP?SCCP) by setting up trust statements on your access ports

Please rate if this helps

Please remember to rate useful posts, by clicking on the stars below.

Highlighted

Hi guys, our issue probably is very simple, we use sdi over fiber units (actually they come with ethernet channel and we use it), so we use ethernet channel for RTP video streaming, from fiber receiver it goes to our lan network, we would like to set highest priority for RTP protocol for all our switches, we use Small Business 220 Series. Or maybe video protocolshave high priority by default? Thank you!

Hi,

Have look on the below configuration example for more clarification and understanding..

http://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/qos_solutions/QoSVoIP/QoSVoIP.html

Hope it Helps..

-GI

View solution in original post

Highlighted

acually it solved our issue, thanks a lot!

Content for Community-Ad