Switching

Hi there,is there any way to make a switch generating a new log entry when syslog was cleared with the "clear logging" command? Thanks,Markus

Hi,we have 4507 chassis with dual Sup 7L-E with Permanent IP base Lic , for some feature requirement i have installed evaluation of Entservices.while upgrading from Ipbase to Eval of Entservices i had to reboot to take effect.so currently its running...

I am using a 3750 with a router provided from Time Warner. I am unable to access the internet from any devices and I believe it is from the IP address changing on the router. How can I configure the switch to maintain the connectivity?

Hello,I have a Nexus 3548 with LAN BASE license; would like to PAT to an IP in pool or to interface. I am pretty new to NX-OS; and older versions only supported 1:1 NAT. So, my queries are:1> Does it support PAT? 2> Is the PAT configuration similar t...

hi, I am using an application which uses "net view" command to discover all computers in the network.net view is a windows command and it does use (as to per my knowledge) netbios-dmg (port 138) the thing is that, all the computers which is in the sa...

The newly configured, WDS on WS2012R2. In a VLAN it works correctly, but in other VLAN PXE does not workAfter reading the documentation, I realized that you need to add the switch core (6509)int vl 111  ip helper-address "PXEServer"  ip directed-broa...

Dear Sir ,          I need to know if i don't add memory (SD-X45-2GB-E ) on switch can i upgrade IP Base to Enterprise service ?  Best Regards,Kiatisak

Good afternoon. I had a problem with VSS , causing the complete collapse of CORE, please help. CORE-HCUA#show versionCisco IOS Software, s2t54 Software (s2t54-ADVIPSERVICESK9-M), Version 15.1(2)SY, RELEASE SOFTWARE (fc4)Technical Support: http://www....

Hey, I got a error message from our C6506-VSS: %SIBYTE-SW2_DFC3-3-SB_TX_FIFO_UNDRFL: TX FIFO underflow on mac 0 (count: 803) Can someone tell me if this is important and what I can do? Thanks!!

Hi Friends,There is Cat 6506 device which is not getting ping but we are able to login the device and device is working fine.This is a access layer switch.This is the configuration of the management interface.interface Vlan14 description Mangement-In...

Dear Friends, I need your help to isolate the cause of this problem.There is a packet drop issue on our VOICE VLAN 10. IP phones and call manager in Voice VLANThe symptoms is phone calls drop. Even Internal dialing (extension to extension ) is droppi...

hi dears i have a nexus switch 5548UP and a fexfabric 2248.i want to recognize which one of fex fabric2248 interfaces has CRC other than zero (i want name of interfaces ) .with this command (for example : sh int | inc "CRC 1") i couldn't get an appro...