Hi, Can anyone help me with the following question and please give reason with your answer.Regadrs,
Hi, Can anyone help me with the following question and please give reason with your answer.Regadrs,
Hi allMerry Christmas and Happy new YearI want to enable SNMP and track the status/ of the interfaces in switches.We have Two- cat 3750 (L3 switch) and Nine-cat 2960 (L2)How to configure the SNMP. can anyone please give me a detailed explanation wit...
HI,I need an advice for a configuration of customer's network.They had 1 public IP with a cisco router. Then they decide to insert a firewall behind a router for VPN, and want to put another public IP for the firewall.Now I suppose that I need to put...
Hi,I had a layer 3 switch and like to divide into 9 different vlans, There will be a admin vlan than will be able to broadcast information to the other 8 other vlans. Is this possible? Thanks.
I have a problem with a cisco ethernetchannel and vmware (IBM Blade Center H) --configuration 6500--interface GigabitEthernet1/28 description Trafico-VM switchport switchport mode trunk channel-group 2 mode on ! interface GigabitEthernet1/29 descript...
We have around 50 remotes switches which are connected via a lease line, only 3 switches are not able to telnet, while try to telnet:The switch will stop responding to the monitoring system, ping will request timeout (before telnet to the switch, tha...
Hi All,Anybody guide me to bind a mac address with ip on 6506.
Hello everyone,from cisco site:You can re-enable a port by using the shutdown and no shutdown interface configuration commands, or you can clear error disable for VLANs by using the clear errdisable interface command. This example shows how to ...
Hello, We have Three locations (A,B,C) across campus. Location A is Main Location, While B & C are remote locations. Distance among all locations approx. 2 miles.I want 10G Fiber among these three locations. I am taking 4510+E with SUP 7E with Redund...
Hi,I have the Cisco Router 861 whit the IOS c860-universalk9-mz.150-1.M7.bin. I have created a Vlan, but when I create a second vlan, I have this message: "Vlan can not be added. Maximum number of 2 vlan(s) in the database.I need to add more than two...
Hi everybody. How is everyone doing?When we use command for example " show ip bgp neighbor 2.2.2.2 received-routes" on Router R1, does this command extract its output from BGP table?My book says the above command will show all the routes received f...
My switch card went down by logging some errors.any idea? %IPFAST-4-FAILATTEMPTOPENIPCPORT: Attempt to open the IPC ports failed. Slot 7, port 'Slot 7: DFS.control.IL', error code 7:no such port.%IPFAST-2-FAILOPENIPCPORT: Could not open the IPC ports...
Hi any one can some give me help to configure the cisco3750 step by step or link to the step by step Sent from Cisco Technical Support iPad App
Hello All,Merry X'mas.On a 4500 switch port , defined as access vlan 10, if the user connects his own dhcp server ( instead of the normal pc that should be connected ), will it cause issues with my existing network. the existing network is all static...
Hi any one can help for the ip scheming for the item below 1. Catalyst 3750 1 unit2. Catalyst 2960 24 port 4 units 3. Wireless controller for the cisco areonet 4 units 4. Router 2801 5 . 6 units of the IBM SERVER for diffrent task 6. 1 units the IBM ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
03-11-2025 08:02 AM | ||
03-07-2025 01:31 AM | ||
03-06-2025 02:18 AM | ||
03-04-2025 11:42 AM | ||
02-27-2025 06:10 AM |
User | Count |
---|---|
14 | |
7 | |
5 | |
5 | |
4 |