Buy or Renew
Buy or Renew

Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

Labels

Forum Posts

Start a conversation

Resolved! Where's my Ethernet0 Interface?

Hi, I badly need help on this issue, here's the story, I upgraded my cisco IOS from v11.3-3 to v12.2-24 and for some reason the ethernet0 interface looks like disabled and won't show when issueing show ip interface brief even show version command lik...

RDP Access

I have a client who has a Cisco Pix 506 and a Catalyst 3560 switch. They have multiple VLAN's configured on the switch and everything seems to be working great internally.They are trying to allow the local prosecutor's office to VPN into their syste...

Trunk encapsulation

Hello,I have already configured the switchport in trunk mode.Once I configured it as trunk, I am not able to add the following statementSwitch1#switchport trunk encapsulation dot1qIt always fails. I also tried the followingSwitch1#no switchport mode ...

Resolved! Config files renamed

We have this old WS-C2950T on our network that had all the flash: configuration files re-named. config.text, private-config.text, and vlan.dat, all had ".renamed" appended to the end of the file names. Has anyone seen this, and do you know what could...

r-vaughan by • Level 1
  • 4367 Views
  • 7 replies
  • 0 Helpful votes

VLAN Access

I have begun installing VLANs on a network. They had a 10.120.0.0/16 network before and it ran on VLAN 5. Printer computers wireless and other devices are on this network that is shared with 12 other building. The default router is in another county ...

o.primous by • Level 1
  • 556 Views
  • 2 replies
  • 0 Helpful votes

Resolved! Cisco 2800 Router RAM Problem

Hi,Our 2800 router would not continue loading and when I connect to the router using hyper terminal this is the error "Bad RAM at location 0xA0000010: wrote 0xA0000010, read 0xA0020010".Can somebody help what the error message means? And how can I fi...

helios999 by • Level 1
  • 4644 Views
  • 2 replies
  • 0 Helpful votes

2811 Power Consumption

Hi All,Little confused here. I have a 2811 and I want to k now what power it will be consuming. It is single AC fed. I look at the data sheet and see:AC input voltage 100 to 240 VAC, autorangingAC input frequency 47-63 HzAC input current 2A (11...

2960-24TC-L

helloi have switch 2960-TC-L connecting fiber MM across module FX to cujaun P333T switch ,the LED on cisco switch green to module FX but the cuajun p333t not work and no ping from PC back the P333t and back cisco can any one help me ??thanks

Small increase in ping response time

Prior to our Sup720 upgrade on our 6509,from a Sup1a, it seemed like most servers directly connected to our core 6509 would average approx. 1ms ping response time from most clients throughout our network. Now that we are on a dual-core 6509 design b...

Transmit Errors on Catalyst 2950

We have several Catalyst 2950 switches over multiple sites that are connected via a BT LES (fibre) 10Mb deditacted lines.When looking at the port statistics for these lines they are showing multiple Transmit errors (at both ends of the connection), m...

VRF Lite and static routes

All,I was playing with vrf lite tonight, and I came across an issue that I think would require more equipment, but I'm not sure.Using gns3, I configured one router as:PE Router A:ip address 172.15.5.2 255.255.255.0ip route 0.0.0.0 0.0.0.0 172.15.5.1R...

Load more