Switching

I have configured several DHCP pools from a class C address and created associated interfaces on a 3560G switch. Here is a breakdown...interface Vlan5 ip address 192.168.60.1 255.255.255.224!interface Vlan7 ip address 192.168.60.65 255.255.255.192!in...

We are running port-security on a 3750-48PS-S switch running C3750-ipbasek9-mz.122-25.SEE IOS and we are experiencing a strange problem. We have a data vlan and a voice vlan configured on each port, we then run port-security sticky on each port with...

Hi all, can anyone tell the types of physical interface types we can use for atm ?, also what are the advantages of using atm ?

Hello, I want to configure routers to synchronise with a windows NTP server. I have put the necessary commands But it didn't work ************************** ntp source Ethernet0/0 ntp server 172.17.4.70 ********************* *************************...

HI all!I have one fundamental question. I have 2 switches caatalyst 3750 and 1 server HP Proliant with one network adapter with 2 interfaces. Both these interfaces combined, so I have team on server.Next, I connects that 2 interfaces of server in dif...

Hi all, when we talk about a tagged frame, does this mean either 802.1p tagging or 802.1q tagging ? and will the ethertype be the same for both of these ?

Does the Catalyst 4507R running IOS 12.2(25)EWA4 support GVRP? If so, can someone provide configuration?Thank You

I have 2 2950c-24, one of them keeps sending Loopback packets on all ports? I looked all over in the setup and found no reason whay this one does it..I tested this switch with a FLUKE tool.

Is cef per-destination load balance is two ways?Meaning if I have 2 links between site A and Site B and both are using cef per-destination load balance, will soure-destination pair used for load balance between site A and site B, will be the same as ...

Hi, it's possible to use Cisco 2960 and 2970 to resolve NLB unicast problem ?thanks

Just like to say thanks to everybody who's helped me up until now... Got this 6509 that i'm working on up and running (after much configuring ans swapping around of MSFC borads, etc). Now the problem is the following:Supervisor image synchronization...

Hi In our company there is a 2610 router that connects two branches of our firm but more than 2 weeks there is a weird problem(we didnt change anything on it) router doesnt route some ip addresses ip address of the router is 10.0.0.4it has a static r...

I have got 3 network 1)192.168.100.0, 2)192.168.200.0 ,3)192.168.300.0 on fastethernet 0/1,0/2,0/3 of 3560 switch.How can i put accesslist such that i can deny all traffic from 192.168.100.0 to 192.168.200.0 ? at the same time network 192.168.200.0 n...