03-23-2022 02:22 AM
Hello,
I was not able to add some configuration to an existing Flow record, and got this message.
% Flow Record: Flow Record is in use. Remove from all clients before editing.
Please, support me in this case as I need to work on some changes in Flow recorder.
Solved! Go to Solution.
03-25-2022 12:09 AM
I removed the "ip flow monitor <named> output" from interface VLAN 7, then I removed the flow monitor settings.
After that , I was able to remove the flow recorder, create the new one with same name with all features .
Thanks for all supports!
03-23-2022 02:26 AM
- Check if this thread can provide hints : https://community.cisco.com/t5/routing/flexible-netflow-v-9/td-p/2834823
M.
03-23-2022 03:23 AM
if the flow already used in the interface config, you can not make any changes.
if the interace has below config - remove and make changes.
ip flow monitor bbbbbbbbbbbb input or output
03-23-2022 03:28 AM
I removed the "ip flow monitor <named> output" from interface VLAN 7 and still not able to make any change in the existing Flow record.
03-23-2022 04:12 AM
check any other place where it was used.
03-25-2022 12:09 AM
I removed the "ip flow monitor <named> output" from interface VLAN 7, then I removed the flow monitor settings.
After that , I was able to remove the flow recorder, create the new one with same name with all features .
Thanks for all supports!
03-25-2022 04:21 AM
glad our suggestion worked,. and appricated your input.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide