cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6449
Views
25
Helpful
7
Replies

Can't configure HSRP: C9300-24T 16.12.02 CAT9K_IOSXE

Hamood Rehman
Level 1
Level 1

 

Hello,

on C9300-24T 16.12.02 CAT9K_IOSXE the Standby command is not recognized. Is this a license issue?

 

SWITCH(config)#int vlan 7
SWITCH(config-if)#stand
SWITCH(config-if)#standby ?
% Unrecognized command
 
Thanks,
1 Accepted Solution

Accepted Solutions

So, you have "network-essentials" Smart License network-essentials

If you have the paid and have the license file for Network Advantage, I would try to install it locally using the link I provided. If you don't have it, you would need to purchase the license first.

HTH

View solution in original post

7 Replies 7

 

Smar License doesn't work? Below is what I have:

 

Technology Package License Information:

------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
network-essentials Smart License network-essentials
dna-essentials Subscription Smart License dna-essentials
AIR License Level: AIR DNA Advantage
Next reload AIR license Level: AIR DNA Advantage


Smart Licensing Status: UNREGISTERED/EVAL MODE

 

Thanks,

What is the current license you have? "sh ver" will show you that.

Also, you can install the license manually. 

 

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-5/configuration_guide/sys_mgmt/b_165_sys_mgmt_9300_cg/configuring_right_to_use_licenses.html

 

HTH

Cisco IOS XE Software, Version 16.12.02
Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.12.02, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Tue 19-Nov-19 10:04 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2019 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 16.12.2r, RELEASE SOFTWARE (P)

  uptime is 25 minutes
Uptime for this control processor is 27 minutes
System returned to ROM by PowerOn
System image file is "flash:packages.conf"
Last reload reason: PowerOn

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


Technology Package License Information:

------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
network-essentials Smart License network-essentials
dna-essentials Subscription Smart License dna-essentials
AIR License Level: AIR DNA Advantage
Next reload AIR license Level: AIR DNA Advantage


Smart Licensing Status: UNREGISTERED/EVAL MODE

cisco C9300-24T (X86) processor with 1343980K/6147K bytes of memory.
Processor board ID  
3 Virtual Ethernet interfaces
28 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
2 TwentyFive Gigabit Ethernet interfaces
2 Forty Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
1638400K bytes of Crash Files at crashinfo:.
11264000K bytes of Flash at flash:.
0K bytes of WebUI ODM Files at webui:.

Base Ethernet MAC Address :  
Motherboard Assembly Number :  
Motherboard Serial Number :  
Model Revision Number : A0
Motherboard Revision Number : A0
Model Number : C9300-24T
System Serial Number :


Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 41 C9300-24T 16.12.02 CAT9K_IOSXE INSTALL


Configuration register is 0x102

So, you have "network-essentials" Smart License network-essentials

If you have the paid and have the license file for Network Advantage, I would try to install it locally using the link I provided. If you don't have it, you would need to purchase the license first.

HTH

For now it running essential

 

Next reload AIR license Level: AIR DNA Advantage


Smart Licensing Status: UNREGISTERED/EVAL MODE

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

sixvilane6
Level 1
Level 1

Hi All, was stuck with a similar scenario customer ordered kit with essential licence, was able to active athe Network Advantage via CLI, apply command below, then save config and then reload

switch(config)#license boot level network-advantage

write

reload

 

You are welcome

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco