09-23-2011 01:59 PM - edited 03-07-2019 02:24 AM
Hello,
I'm working on deploying a new 4510R+E for our organization. This is my first experience with a modular switch. I'm trying to enable SSO, however in the redundancy configuration mode, the sso command is not available. Is SSO only available with certain software images / licensing levels? See below for output:
Switch#show mod
Chassis Type : WS-C4510R+E
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 48 10/100/1000BaseT Premium POE E Series WS-X4748-RJ45V+E
2 48 10/100/1000BaseT Premium POE E Series WS-X4748-RJ45V+E
3 48 10/100/1000BaseT Premium POE E Series WS-X4748-RJ45V+E
4 48 10/100/1000BaseT (RJ45) WS-X4648-RJ45-E
5 4 Sup 7-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7-E
6 4 Sup 7-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7-E
7 48 10/100/1000BaseT (RJ45) WS-X4648-RJ45-E
8 48 10/100/1000BaseT (RJ45) WS-X4648-RJ45-E
9 48 10/100/1000BaseT (RJ45) WS-X4648-RJ45-E
10 48 10/100/1000BaseT (RJ45) WS-X4648-RJ45-E
M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 0026.992c. to 0026.992c. 1.0 Ok
2 0026.992c. to 0026.992c. 1.0 Ok
3 0026.992c. to 0026.992c. 1.0 Ok
4 1cdf.0f7d. to 1cdf.0f7d. 1.0 Ok
5 c471.feb5. to c471.feb5. 1.0 15.0(1r)SG1 03.01.00.SG Ok
6 c471.feb5. to c471.feb5. 1.0 15.0(1r)SG1 03.01.00.SG Ok
7 1cdf.0f7e. to 1cdf.0f7e. 1.0 Ok
8 588d.0949. to 588d.0949. 1.0 Ok
9 c84c.7513. to c84c.7513. 1.0 Ok
10 1cdf.0f7d. to 1cdf.0f7d. 1.0 Ok
Mod Redundancy role Operating mode Redundancy status
----+-------------------+-------------------+----------------------------------
5 Active Supervisor RPR Active
6 Standby Supervisor RPR Standby cold
Switch#
Switch#show bootvar
BOOT variable = bootflash:cat4500e-universal.SPA.03.01.00.SG.150-1.XO.bin,1;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2101
Standby BOOT variable = bootflash:cat4500e-universal.SPA.03.01.00.SG.150-1.XO.bin,1;
Standby CONFIG_FILE variable does not exist
Standby BOOTLDR variable does not exist
Standby Configuration register is 0x2101
Switch#
Switch(config-red)#mode ?
rpr Route Processor Redundancy
Switch(config-red)#mode
09-23-2011 02:42 PM
Yes I believe it is only available for ipbase and up.
11-25-2011 05:19 AM
Can you give the output of
show license feature
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide