I have a query regarding traffic shaping when using the C3850-XS.
We have a 10Gbps connection between two locations. Between the two locations the connection will be configured as a 'trunk'. And we will be using Vlans/SVI's between the locations to separate (VRF) different traffic. We would like to set a maximum amount of the 10Gbps that two services can consume. I've built what I believe to be the appropriate ACL, class-map and policy-map that I will use and apply outbound on the SVI from the source to the location and something similar from the destination to the source that I hope will restrict the maximum amount of bandwidth each service can consume (please see attached). Unfortunately I don't have the hardware to test this yet, so was looking for some guidance as to whether this was the best way to achieve this or if I should be considering something else?
I've added the part of the topology I refer to. I'd just like to confirm if it is possible to shape traffic egressing an SVI. Obviously this is a logical interface and as such there is no defined bandwidth associated with it, so I'm not sure if this is even possible. But would like to understand what other options I have given I have to trunk between the two locations for shaping.
We managed to get this working by marking the traffic on the ingress interface, injecting a DSCP value into the IP header (using ACL, class-map and policy-map), then shaped outbound based on the applied DSCP value.
You have an extra week of fun! Capture the Flag has been extended through July 17. Register using the links below.
As a part of Cisco Live US auxiliary programs, we invite you to learn new technologies and obtain hands-on experience in a...
Hi,I'm trying to setup a cellular connection on my Cisco 1111 router.The interface is UP and it gets a private IPv4 and a public IPv6 address.If I try to send something on IPv4 through the cellular interface it works fine.But there seems to be an issue wi...
For an offline or printed copy of this document, simply choose ⋮ Options > Printer Friendly Page. You may then Print, Print to PDF or copy and paste to any other document format you like.
Is your WAN ready for a multicloud transformation?
Network Insider Live Webinar
Tuesday, July 21, 2020 10:00 am Pacific Time (San Francisco, GMT-08:00)
This webinar will show how convergence between SD-WAN and Security is emerging as important new SASE a...