Cisco 9300mac address table not refreshing

[salomidhogela]

I am experiencing issues with a Cisco 9300mac address table not refreshing. Mac Address are getting stuck on the interfaces. I have configured port-security on the interfaces.

[balaji.bandi · Accepted solution]

First i would check - xxxxxxxxxxxxxx  - this MAC address in the MAC table, clear it, and apply the confg as suggested.

shut and no shut the port and test connecting the PC.

Note : if the dynamic MAC address, as soon as you remove the network cables the MAC should flush automatically.

Still you are not address, why does the Fixed device required to move from one port to another ? what is the reason ?

[salomidhogela]

All the solutions provided seems to be working, I will monitor and advise if I pick up an issue.

Tx,

Salom

[balaji.bandi · Accepted solution]

Glad to know all good, keep us informed about the progress, if no furtehr assitance required..mark as resolved and appriciated your input.

[MHM Cisco World]

clear port-security dynamic <<- use this command to clear the OLD (non aging) mac-address add to port-security table 
then do test again 

[MHM Cisco World]

No thanks to Me ...LoL...