cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
8059
Views
25
Helpful
22
Replies
069521139
Beginner

Cisco catalyst 9500-48Y4C

Does cisco catalyst 9500-48y4c support stack wise virtual?

If it dose not support ,Which solution cisco recommend?

 

Wongsakorn,

 

2 ACCEPTED SOLUTIONS

Accepted Solutions
andresfr
Cisco Employee

Hello,

I hope you’re doing well.

Cisco Catalyst 9500-48Y4C does not support StackWise virtual at the moment. You might to wait until IOS-XE 16.10.1 to see this feature available on this platform.

Starting with this release (16.8.x), the feature is also supported on the following models of the Cisco Catalyst 9500 Series Switches:

* C9500-24Q
* C9500-12Q
* C9500-40X
* C9500-16X
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-8/release_notes/ol-16-8-9500.html

The same is true if running IOS-XE 16.9.x:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-9/release_notes/ol-16-9-9500.html

Note: search for Cisco StackWise Virtual when visiting the links above.

Regards,

View solution in original post

Leo Laohoo
VIP Community Legend

Depends on the firmware loaded.  

Please read Configuring Cisco StackWise Virtual (IOS-XE version 16.12.X) and go to the Cisco StackWise Virtual on Cisco Catalyst 9500 Series Switches section.

View solution in original post

22 REPLIES 22
Leo Laohoo
VIP Community Legend

It does but you don't want to enable it yet.

I am mistaken.  Stackwise Virtual is only supported on the "C9500-12Q, C9500-16X, C9500-24Q, C9500-40X".  

I am not sure if 48Y support is in the roadmap or not.  You may need to ask your Cisco SE/AM for this.

Do you have a document reference showing any hardware supported by stackwise virtual?

I think it support in future software but I would like to know if it does not support we have another way or not ?

Thanks for you help

Hello,

 

Did you find the provided information useful? If so, please provide your feedback so others can benefit from this post.

 

Regards,

andresfr
Cisco Employee

Hello,

I hope you’re doing well.

Cisco Catalyst 9500-48Y4C does not support StackWise virtual at the moment. You might to wait until IOS-XE 16.10.1 to see this feature available on this platform.

Starting with this release (16.8.x), the feature is also supported on the following models of the Cisco Catalyst 9500 Series Switches:

* C9500-24Q
* C9500-12Q
* C9500-40X
* C9500-16X
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-8/release_notes/ol-16-8-9500.html

The same is true if running IOS-XE 16.9.x:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-9/release_notes/ol-16-9-9500.html

Note: search for Cisco StackWise Virtual when visiting the links above.

Regards,

View solution in original post

is there any timeline when it will be supported

Leo Laohoo
VIP Community Legend


@tonysamir wrote:

is there any timeline when it will be supported


Don't rush them.  Something that is "stable" is a lot better than something that is buggy (and keeps you up all night) like CSCvi92251, CSCvi71507, CSCvj73842, and much, much more.

Hi andresfr

When IOS-XE 16.10.1 available on Catalyst 9500-48Y4C?

Customer have plan to purchase on next month but they worry about in this feature.

 

Regards.

 

Hi,

It might* be available on the second half of november this year. Please proceed with caution and at your own discretion. Keep in mind that this will be the first release supporting the feature on that specific platform.

Regards,

Will the uplink modules on the 48Y4C be used for the stackwise virtual connection in the future release?

CCIE 26175
www.techsnips.com

Update:

 

'C9500-High performance
Starting from 16.10.1 Release, StackWise Virtual is also supported on all Cisco Catalyst 9500 high performance
models: C9500-24Y4C, C9500-48Y4C, C9500-32QC, C9500-32C.'

 

https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-9000/nb-06-cat-9k-stack-wp-cte-en.pdf

Hello

 

Because of the EOL announcement of catalyst 4500X switch, we want to replace it  with C9500-48Y4C-A in the our new LOM.

I have configured below LOM in the cisco build and price portal:

C9500-48Y4C-ACatalyst 9500 48-port x 1/10/25G + 4-port 40/100G, Advantage1
SC9500HUK9-1612Cisco Catalyst 9500H XE.16.12 UNIVERSAL  1
C9K-PWR-650WAC-R650W AC Config 4 Power Supply front to back cooling  1
C9K-PWR-650WAC-R/2650W AC Config 4 Power Supply front to back cooling  1
CAB-C13-CBNCabinet Jumper Power Cord, 250 VAC 10A, C14-C13 Connectors  2
C9500-DNA-48Y4C-AC9500 DNA Advantage, Term License1
C9500-DNA-A-3YCisco Catalyst 9500 DNA Advantage 3 Year License1
PI-LFAS-AP-T-3YPI Dev Lic for Lifecycle & Assurance Term 3Y  3

 

We just want to use VSS and some simple routing  features.

Can I use this switch without DNA center for above features?

Do the selected license support VSS?

 

Thank you

 

Stackwise Virtual (vss we wont talk about the difference here) Required DNA-Advantage Licensing. Your sku c9500-48Y4C-A will cover that. 

Yes you can use this device with out DNAC, this is just the new licensing model. 

 

Hope that covers all of your questions.