07-18-2011 10:02 AM - edited 03-07-2019 01:16 AM
Can a FET-10G transceiver be used in a 5548 to connect a 2248? I was under the impression they could but when ever I put on in the 5548 it tells me that
(SFP validation failed) for that interface. Is there a config I need to make in order to get this transceiver to work in the 5548 for connectivity tot he 2248s?
Solved! Go to Solution.
07-18-2011 10:48 AM
As long as the 2248 is connected to the 5548 via its fabric port, not the host port, it is supported.
You should configured the 5548 ports to switchport mode fex before inserting the FET-10G.
HTH,
jerry
07-18-2011 10:48 AM
As long as the 2248 is connected to the 5548 via its fabric port, not the host port, it is supported.
You should configured the 5548 ports to switchport mode fex before inserting the FET-10G.
HTH,
jerry
07-19-2011 07:23 AM
Thanks, I feel like I should have known that.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: