05-26-2015 12:43 AM - edited 03-08-2019 12:10 AM
HI experts,
I am configuring my 4500 core switch as a DNS server but IP DNS SERVER command is not working...
Sup:- ws-x45-SUP7L-E
IOS:- cat4500e-universalk9.spa.03.05.03.e.152-1.e3.bin
Please assist
Suhas
05-26-2015 01:30 AM
that was old command. Use below link for configuration:
05-26-2015 02:31 AM
Hi Vivek,
Thanks for your reply...
But my core switch not accepting IP DNS SERVER command...
is there any IOS version issue.
Thanks in advance...
Suhas
05-26-2015 02:35 AM
I don't think you need "IP DNS SERVER" command in the IOS version which you are using currently. It will work without that. Just try with the link which i shared.
05-26-2015 03:31 AM
ok....let me check..
06-24-2015 10:39 AM
Posts in this discussion have been modified due to possible misconduct. Please refer to the CSC terms of use for more details. https://supportforums.cisco.com/document/29951/cisco-support-community-acceptable-use-agreement |
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide