11-13-2012 06:06 AM - edited 03-07-2019 10:00 AM
I was wondering if this output form a core 3750 switch seems to be hoveriing on the high end? Thanks, Pat.
CoreSwitch#sh processes cpu hist
100
90 *
80 *
70 * * *
60 * * * * *** * * * * *
50 * * * * * **** * ** * ** * * ***
40 ** ***** * * * *** ** *** **** ** ** ** **** **** *** * *
30 **********************************************************************
20 **********************************************************************
10 ######################################################################
0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.
0 5 0 5 0 5 0 5 0 5 0 5 0
CPU% per hour (last 72 hours)
* = maximum CPU% # = average CPU%
GigabitEthernet1/0/26 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is f0f7.552c.201a (bia f0f7.552c.201a)
Description: Etherchannel to Avaya Switch
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 45/255, rxload 5/255
GigabitEthernet1/0/26 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is f0f7.552c.201a (bia f0f7.552c.201a)
Description: Etherchannel to BR-5650-Stack
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 63/255, rxload 4/255
Seems to be going up - at what level should I be concerned?
Solved! Go to Solution.
11-13-2012 06:49 AM
Pat,
The one you post it is for the last 72 hours. What is it for the last 60 second and 60 minutes.
Even though you have some CPU spikes, the average is still at about 10
10 ######################################################################
Regarding the interface, this could be normal, as the switches are in production and traffic traversing the interfaces.
HTH
11-13-2012 06:49 AM
Pat,
The one you post it is for the last 72 hours. What is it for the last 60 second and 60 minutes.
Even though you have some CPU spikes, the average is still at about 10
10 ######################################################################
Regarding the interface, this could be normal, as the switches are in production and traffic traversing the interfaces.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide