Help Required - Lab Setup Routing

svictoryshanmugam · ‎07-14-2011

I am in the process of setting up a vocie lab.

I have three networks
172.16.1.0(Voice) - def gateway 172.16.1.1
172.16.2.0(Data) - def gateway 172.16.2.1
172.16.3.0(management vlan)
created in a 2621XM through dhcp pool.
I have the IP Phones hooked up to the Voice network 172.16.1.0 (Vlan 10) and a deskop in 172.16.2.0 ( vlan 50). The IP Phones just work fine having registed with the CME (172.16.1.1)
I can ping the router 172.16.2.1 from the server 172.16.2.11 and vice versa.
I am not able to ping the other network 172.16.1.0 from the Server (172.16.2.11).

Please help. Thanks for your invaluable time.

p.mcgowan · ‎07-14-2011

can you please post config of router

show run

thanks

Vivek V · ‎07-14-2011

Hi,

Please check if the SVI 2.1(source ping) is able to ping the SVI's of the other networks .

If this is successfull, please try a source ping to the end devices in the other vlans.

If the above mentioned case is occurring , one of these will fail.

Depending on this , we can decide whether it is a routing issue or some other config.

(please attach config as well)

HTH

/ Vivek

Dennis Mink · ‎07-14-2011

have you set a default gateway on your server 172.16.2.11 to point it to 172.16.2.1?

Please remember to rate useful posts, by clicking on the stars below.

svictoryshanmugam · ‎07-14-2011

Here is router configuration. I thank your for valuable time....

VOICE_GATEWAY#show run

Building configuration...

Current configuration : 2026 bytes

!

version 12.4

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname VOICE_GATEWAY

!

boot-start-marker

boot-end-marker

!

no aaa new-model

no network-clock-participate slot 1

no network-clock-participate wic 0

ip cef

!

no ip dhcp use vrf connected

ip dhcp excluded-address 172.16.1.1 172.16.1.10

ip dhcp excluded-address 172.16.2.1 172.16.2.10

!

ip dhcp pool VOICE

network 172.16.1.0 255.255.255.0

default-router 172.16.1.1

dns-server 4.2.2.2

option 150 ip 172.16.1.1

!

ip dhcp pool DATA

network 172.16.2.0 255.255.255.0

default-router 172.16.2.1

option 150 ip 172.16.1.1

!

no ip domain lookup

ip host SW1 172.16.3.2

multilink bundle-name authenticated

!

vlan internal allocation policy ascending

!

interface FastEthernet0/0

no ip address

duplex auto

speed auto

!

interface FastEthernet0/0.1

encapsulation dot1Q 1 native

ip address 172.16.3.1 255.255.255.0

!

interface FastEthernet0/0.10

encapsulation dot1Q 10

ip address 172.16.1.1 255.255.255.0

!

interface FastEthernet0/0.50

encapsulation dot1Q 50

ip address 172.16.2.1 255.255.255.0

!

interface Serial0/0

no ip address

shutdown

no fair-queue

!

router eigrp 109

network 172.16.0.0

auto-summary

!

ip http server

no ip http secure-server

!

control-plane

!

voice-port 1/0/0

!

voice-port 1/0/1

!

telephony-service

max-ephones 10

max-dn 10

ip source-address 172.16.1.1 port 2000

auto assign 1 to 5

auto assign 1 to 5 type 7940

max-conferences 4 gain -6

transfer-system full-consult

create cnf-files version-stamp Jan 01 2002 00:00:00

!

ephone-dn 1 dual-line

number 1001

name Jason

!

ephone-dn 2 dual-line

number 1002

name Jensy

!

ephone 1

mac-address 0017.9538.84D9

type 7940

button 1:1

!

ephone 2

mac-address 0013.C44A.7CC0

type 7940

button 2:2

!

line con 0

password cisco

login

line aux 0

line vty 0 4

password cisco

login

!

end

VOICE_GATEWAY#

p.mcgowan · ‎07-15-2011

can you do extended ping to 172.16.2.1 with a source address of 172.16.1.1?

If you are unfamiliar with extended ping please look at link below for full explanation

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f22.shtml

have you checked the default gateway of the sever (172.16.2.11) is this set for 172.16.2.1?

svictoryshanmugam · ‎07-16-2011

Hi mcgowan,

Thanks for the response.

I checked the extended ping and I am able to do extended ping successfully from Source 172.16.1.1 to Target 172.16.2.1 but not to Target 172.16.2.11.... Do you think this is something to do with my desktop ? I have added exceptions in such a way to allow router requests to be accepted in the windows firewall(ICMP) in the desktop. Pls help

Thanks mate for your time....