03-20-2019 12:42 PM
Hi,
One of the server of ILO port is connected to the switch.
I know the IP address and MAC address of this ILO port.
But i dont know this devices is connected to which switch.
ILO port of MAC and IP address are can't find main switch Mac address table.
But i can see under arp table of main switch via Vlan 1.
But VLAN 1 has multiple interfaces and some interfaces are connected to other switch again.
ILO port IP address is link with Vlan 1 interface.
If there any option to check this ILO port is connected to which switch.
Appreciate for your response. Thanks
03-20-2019 01:02 PM - edited 03-20-2019 01:03 PM
here is the steps :
Ping from your PC to ILO Ip address - once ping success, login to switch and do the below commands
1. #show ip arp x.x.x.x ( IP address of the Server)
2. copy the mac address from the about results.
3. #show mac address-table | in xxx.xxxx.xxxx
result will show you what port it connected
03-20-2019 01:30 PM
I already did that one it's didn't show.
cisco#sh ip arp 111.111.111.111
Protocol Address Age (min) Hardware Addr Type Interface
Internet 111.111.111.111 4 abcd.abcd.abcd ARPA Vlan1
cisco#sh mac address-table | in abcd.abcd.abcd
pls take note ip address and mac address are change coz it's from production network.
Thanks
03-20-2019 02:30 PM
Hello
perfrom this again from the core switch if you’ve not done this already and then trace the MAC address from there.
03-20-2019 08:06 PM
Hi,
Trying to ping the ILO IP address from the Main switch. You will get mac address in the mac table and run a command as:
traceroute mac <Source Mac address> <ILO MAC ADDRESS>
Regards,
Deepak Kumar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide