Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,In our network, we have slowness issue traffic between the Primary Data center to the Azure cloud. only one-way traffic.Server (in UCS cluster Vmware Esxi) - Fabric Switch - Nexus7K - Nexus9k - CEISR01 (MPLS router) - Express Route - End deice (in...
Hi, i am looking the way how to configure load sharing dual home to two ISP.Below is my design. All the branches are connected same design as below. Switch01 connected to ISR01 and ISR02 running OSPF.ISR01 and ISR02 are connected IBGP is running.ISR0...
Hi, I tried to configure the TACACS and I forget to add local command for authorization commands.Now I can login to switch(Nexus 7009) but when I type any command I got authorization error. Error: AAA authorization failed AAA_AUTHOR_STATUS_METHOD=17(...
Hi, One of the server of ILO port is connected to the switch.I know the IP address and MAC address of this ILO port.But i dont know this devices is connected to which switch.ILO port of MAC and IP address are can't find main switch Mac address table....
Thanks for the reply. yes, it is an MPLS router. could it be a routing issue? why i am asking is the last testing what i found is if the traffic go from DMZ VLAN is faster than other servers VLAN. In UCS they have different servers are setup. some ar...
I already did that one it's didn't show. cisco#sh ip arp 111.111.111.111Protocol Address Age (min) Hardware Addr Type InterfaceInternet 111.111.111.111 4 abcd.abcd.abcd ARPA Vlan1cisco#sh mac address-table | in abcd.abcd.abcd pls take note ip addres...
Hi, Thanks for the info.I know how to disable SNMP Trap Controls.Currently i create 2 rules as below.May i know your opinion for those 2? will it be work ?
