I can only ping the default gateway and not the PC's IP

[Mohamed Fyaz]

Hi all,

I created two SVIs, vlan 10 with 192.168.10.1 and vlan 20 with 192.168.20.1

In my layer 3 switch, I assigned vlan 10 and vlan 20 to fa0/11 and fa0/23 respectivtly. as switchport mode access.

I also enabled ip routing. In my PC, entered the static ip addresses. Later I found out that, i can only ping the default gateway. and not my PC ip address which is 192.168.10.20 and 192.168.20.20. I am getting RTO.

Please advise. What am I missing out?

Thanks, 
Fyaz

[johnd2310 · Accepted solution]

Hi,

if you run "show ip arp", can you see the mac and ip of all the devices? Have you checked firewall on PCs?

Thanks

John

[Mohamed Fyaz]

I found that because of my windows firewall, i was not able to ping each other! thanks for your suggestion guys! :)

[Harold Ritter]

Hi Mohamed,

Did you configured the default gateway on the PCs?

Regards,