07-22-2019 02:38 AM
Hello everybody,
I would like to authenticate a Cisco IE1000 switch against our Microsoft NPS server. Unfortunately, this does not work. We already have Cisco 2960 in use, it works without problems with the following settings:
look at Attachement
However, this configuration does not work for the IE switches. What is wrong or what needs to be set? Can you help me?
best reagrds
07-22-2019 08:33 PM
It seems you are trying to perform device administration (allowing a network admin to login to the switch) via RADIUS and that might not have supported on this platform. I would suggest you to try testing 802.1X or MAB against your RADIUS server. If you want to try T+, I would suggest you to try Identity Services Engine (ISE).
07-22-2019 10:31 PM - edited 07-22-2019 10:32 PM
07-27-2019 05:40 PM
Not I know of. I moved your discussion to Switching, as your inquiry is specific to an IE1000 feature.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide