06-11-2013 04:52 AM - edited 03-07-2019 01:49 PM
Hi Friends ,
I am planning to configure NAT for giving internet access to our local LAN users . while configuring NAT i am receiving the following errors . kindly give your valuable support to get out of this problem.
i am pasteing the error for your reference
NBAR Error: symbol addition
% NBAR Error: symbol addition0:16:11
.251: %NBAR-2-NOMEMOR
Y: No memory available for StILE lmalloc
-Traceback= 2386C9ECz 2385C11Cz 2385C47Cz 2385C694z 23869E70z 2386A020z 2386E0E8z 238487F0z 2388BE40z 2388C1F8z 238C9B00z 22E49A74z 22E4C410z 22502F28z 22509600z 2251AAB8z
% NBAR Error: symbol addition
% NBAR Error: symbol addition
% NBAR Error: symbol addition
% NBAR Error: symbol addition
% NBAR Error: symbol addition
% NBAR Error: symbol addition
% NBAR Error: symbol addition
% NBAR Error: symbol addition
06-11-2013 06:32 AM
Hi,
you haven't got enough memory:
NBAR Error: symbol addition
% NBAR Error: symbol addition0:16:11
.251: %NBAR-2-NOMEMOR
Y: No memory available for StILE lmalloc
Can you provide the sh version output to get the model and available RAM
Regards
Alain
Don't forget to rate helpful posts.
06-11-2013 09:21 PM
HI ,
i am sending the show version command output for your reference
------------------ show version ------------------
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Thu 26-Jul-12 19:34 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
RoyalEnfield uptime is 1 hour, 20 minutes
System returned to ROM by power-on
System image file is "usbflash0:c1900-universalk9-mz.SPA.152-4.M1.bin"
Last reload type: Normal Reload
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco CISCO1905/K9 (revision 1.0) with 225280K/36864K bytes of memory.
Processor board ID FGL164825WS
2 Gigabit Ethernet interfaces
1 Serial(sync/async) interface
1 terminal line
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249840K bytes of USB Flash usbflash0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO1905/K9 FGL164825WS
Technology Package License Information for Module:'c1900'
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
data None None None
Configuration register is 0x2102
06-11-2013 07:14 AM
ASAK Mohammed,
Please correct me if I am wrong, Are you enabling NAT + NBAR on this device? If yes then probably you are running out of memory. Hence the option would be to dislabe the NBAR with NAT.
you can do the following in global config mode.
no ip nat service nbar
This command doesn't enable NBAR by default when you enable NAT.
Note: You have only 256M of memory on that device.
We have recorded bug for this issue: CSCua65133
Please let me know if you have any questions.
HTH
Rgards
Inayath
*Plz rate this post if its helpfull and mark the thread as answered if this resolved your query.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide