cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
13032
Views
0
Helpful
2
Replies
Beginner

Netflow support 3850

Does anyone know if catalyst 3850 support Full Netflow or Sample Netflow? 
 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

The switch supports full

The switch supports full NetFlow as well as sampling. Here is an example config for 3850 switch:

https://thwack.solarwinds.com/community/solarwinds-community/geek-speak_tht/blog/2014/01/22/netflow-and-catalyst-switch-netflow-v9-configuration-for-cisco-catalyst-3850-switch

And to add sampling, if you need it, here is an example:

conf t
sampler NTAsampler    \\ name of the sampler
desc 1 in 1024 sampling     \\ describe your sampler
mode random 1 out-of 1024 \\ 1 out-of 2 up to 1024 is supported

int Gi1/0/1
ip flow monitor NTAmonitor sampler NTAsampler input \\ or output

command explanation: ip flow monitor [monitor name] sampler [sampler name] [input or output]

Regards, Don Thomas Jacob http://www.solarwinds.com/netflow-traffic-analyzer.aspx Head Geek @ SolarWinds NOTE: Please rate and close questions if you found any of the answers helpful.

View solution in original post

2 REPLIES 2
Highlighted

Full 'unsampled' support for

Full 'unsampled' support for NetFlow.  See this post:  https://www.plixer.com/blog/general/cisco-catalyst-3850-netflow-support/ 

I hope this helps.  Call us at plixer as we use this switch in house with the wireless controller.  Great switch. 

Highlighted
Beginner

The switch supports full

The switch supports full NetFlow as well as sampling. Here is an example config for 3850 switch:

https://thwack.solarwinds.com/community/solarwinds-community/geek-speak_tht/blog/2014/01/22/netflow-and-catalyst-switch-netflow-v9-configuration-for-cisco-catalyst-3850-switch

And to add sampling, if you need it, here is an example:

conf t
sampler NTAsampler    \\ name of the sampler
desc 1 in 1024 sampling     \\ describe your sampler
mode random 1 out-of 1024 \\ 1 out-of 2 up to 1024 is supported

int Gi1/0/1
ip flow monitor NTAmonitor sampler NTAsampler input \\ or output

command explanation: ip flow monitor [monitor name] sampler [sampler name] [input or output]

Regards, Don Thomas Jacob http://www.solarwinds.com/netflow-traffic-analyzer.aspx Head Geek @ SolarWinds NOTE: Please rate and close questions if you found any of the answers helpful.

View solution in original post

CreatePlease to create content
Content for Community-Ad