08-18-2015 03:28 PM - edited 03-08-2019 01:24 AM
Does anyone know if catalyst 3850 support Full Netflow or Sample Netflow?
Solved! Go to Solution.
08-25-2015 01:11 AM
The switch supports full NetFlow as well as sampling. Here is an example config for 3850 switch:
And to add sampling, if you need it, here is an example:
conf t
sampler NTAsampler \\ name of the sampler
desc 1 in 1024 sampling \\ describe your sampler
mode random 1 out-of 1024 \\ 1 out-of 2 up to 1024 is supported
int Gi1/0/1
ip flow monitor NTAmonitor sampler NTAsampler input \\ or output
command explanation: ip flow monitor [monitor name] sampler [sampler name] [input or output]
08-19-2015 06:02 AM
Full 'unsampled' support for NetFlow. See this post: https://www.plixer.com/blog/general/cisco-catalyst-3850-netflow-support/
I hope this helps. Call us at plixer as we use this switch in house with the wireless controller. Great switch.
08-25-2015 01:11 AM
The switch supports full NetFlow as well as sampling. Here is an example config for 3850 switch:
And to add sampling, if you need it, here is an example:
conf t
sampler NTAsampler \\ name of the sampler
desc 1 in 1024 sampling \\ describe your sampler
mode random 1 out-of 1024 \\ 1 out-of 2 up to 1024 is supported
int Gi1/0/1
ip flow monitor NTAmonitor sampler NTAsampler input \\ or output
command explanation: ip flow monitor [monitor name] sampler [sampler name] [input or output]
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide