09-19-2012 05:36 AM - edited 03-07-2019 08:57 AM
Does anyone have any info on how to configure dynamic-pinning, instead of static pinning on a Nexus 2224 connected to a 7009?
Can't seem to find anything on CCO!
Cheers
Colin
Solved! Go to Solution.
09-19-2012 08:17 AM
Default configuration will do that. You don't have to configure anything.
Regards,
jerry
09-19-2012 08:24 AM
09-19-2012 05:57 AM
I don't think you can change that. The only option I see under for example fex 101 is Fex max-link. And "sh fex det" show that the pinning is static
HTH
09-19-2012 06:36 AM
Was just reading that this is an option, in place of static pinning.
Reason is that if an uplink fails, the ports still have connectivity.
maybe a new feature then?
09-19-2012 06:41 AM
Maybe, but I am running 6.1.1 and I don't see it. Did the doc say what version of code should have it?
09-19-2012 06:43 AM
Its mentioned in the Designing Cisco Network Architectures (ARCH) book by John Tiso!
09-19-2012 08:14 AM
Do you mean if a uplink failed, you want all traffic to moved the another fabric interface?
Regards,
jerry
09-19-2012 08:16 AM
yes, that would be the reason
09-19-2012 08:17 AM
Default configuration will do that. You don't have to configure anything.
Regards,
jerry
09-19-2012 08:22 AM
is that using the command "pinning max-links 1" ?
09-19-2012 08:24 AM
That is correct.
Regards,
jerry
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: