05-28-2012 01:46 AM - edited 03-07-2019 06:56 AM
Hi All,
Could someone confirm if the below nexus 5020 nx-os version and type/revision of my GLC-T is compatible with each other? I noticed also the "Transceiver calibation is invalid" when i do show int e1/8 transceiver details , what does it mean?
UTP straight cable already plug between server and N5K but still our link is not connected.
Thanks in advance!
cheers,
mhon
05-28-2012 03:41 PM
I don't remember if this is the same issue that you need a "v3" SFP to work. Maybe I'm wrong.
05-28-2012 09:52 PM
Hi Leolaohoo,
thanks for your response. do you think revision 11.0 is not "v3"?
05-28-2012 04:02 PM
Hi,
Your version of OS does support it. The minimum requirement is NX-OS 4.0(1a)N1(1)
have a look at table-9 in this link:
Also, have a look at this treat:
https://supportforums.cisco.com/thread/2014677
HTH
05-28-2012 10:02 PM
Hi Reza,
thanks for your response. Yes, I already checked this one before but I don't understand still it doesn't work
I would like to open a case but unfortunately my contract was expired and on the way to renew it..
BR,
mhon
05-28-2012 04:18 PM
I may be thinking of another switch but I believe that you need to use speed 1000 on the interface to get it to work.
Sent from Cisco Technical Support iPhone App
05-28-2012 10:03 PM
hi kunkelta, I already configured the speed on the interface
05-28-2012 04:28 PM
Another thought is that the 5020 will only do 1 Gb on certain ports. Not certain but it is the first few ports that do 1 Gb.
Sent from Cisco Technical Support iPhone App
05-28-2012 10:04 PM
Yes, you are right. 5020 support 1G starting from port eth1 - eth16..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide