12-02-2013 09:31 AM - edited 03-07-2019 04:53 PM
Hi, my F132 is running at 230Gbps in 7009 and 5x FAB2. Why is this F1 card running at this speed and M2 card is at full 550Gbps?
Datasheets of both cards give their max BW lower than 550Gbps. After all, maybe the question should rather be why the M2 is at 550Gbps
Thank you for any input!
N7K1# sh mod | head line 10
Mod Ports Module-Type Model Status
--- ----- ----------------------------------- ------------------ ----------
1 0 Supervisor module-2 N7K-SUP2E active *
2 0 Supervisor module-2 N7K-SUP2E ha-standby
3 24 10 Gbps Ethernet Module N7K-M224XP-23L ok
4 24 10 Gbps Ethernet Module N7K-M224XP-23L ok
8 32 1/10 Gbps Ethernet Module N7K-F132XP-15 ok
9 32 1/10 Gbps Ethernet Module N7K-F132XP-15 ok
N7K1# sh hardware fabric-u
------------------------------------------------
Slot Total Fabric Utilization
Bandwidth Ingress % Egress %
------------------------------------------------
1 275 Gbps 0.00 0.00
2 275 Gbps 0.00 0.00
3 550 Gbps 0.00 0.00
4 550 Gbps 0.00 0.00
8 230 Gbps 0.00 0.00
9 230 Gbps 0.00 0.00
Solved! Go to Solution.
12-03-2013 08:25 PM
Hi,
See this below:
Cisco Nexus 7000 F1-Series 32-Port 1 and 10 Gigabit Ethernet Module Date Sheet
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/data_sheet_c78-605622.html
Cisco Nexus 7000 M2-Series 24-Port 10 Gigabit Ethernet Module with XL Option Data Sheet
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/data_sheet_c78-706775.html
Hope this helps.
12-03-2013 08:25 PM
Hi,
See this below:
Cisco Nexus 7000 F1-Series 32-Port 1 and 10 Gigabit Ethernet Module Date Sheet
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/data_sheet_c78-605622.html
Cisco Nexus 7000 M2-Series 24-Port 10 Gigabit Ethernet Module with XL Option Data Sheet
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/data_sheet_c78-706775.html
Hope this helps.
12-05-2013 03:59 AM
Leo, thanks for the link, marked as correct.
To add I used this table for my comparison:
http://www.cisco.com/en/US/products/ps9402/prod_models_comparison.html#~tab-b .
There M224 is 240Gbps and F132 used to have 230Gbps. Interestingly that FAB2 enable 550Gbps on M2 but not on F1.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide