PTP interface status is not changing from uncalibrated to SLAVE state

[nadim-eee-buet12]

Hi,

I was trying to PTP sync across our research network, but at one point, one device's PTP interface stuck at UNCALIBRATED mode, instead of changing to SLAVE mode. Both Master and Slave devices are Cisco 9300 and they are connected using fiber. But it's down stream device's (9300) port status also changed to slave mode. Would you please help me to resolve this issue?

TwentyFiveGigE1/1/1 24 UNCALIBRATED

[balaji.bandi]

what IOS XE Code running, how is your network hierarchy looks like, it show domain 24  is that matches in the config of others ?

check below reference guide :

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-12/configuration_guide/lyr2/b_1612_lyr2_9300_cg/configuring_precision_time_protocol__ptp_.html

UNCALIBRATED  - is part of election process - how is your configuration looks like ?

check troubleshooting :

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-9300-series-switches/221062-troubleshoot-precision-time-protocol-pt.html

[nadim-eee-buet12]

Thanks Balaji for your reply.
So, in our case,

Grandmaster clock directly connected to the 1st Cisco 9300 with ethernet cables.(tenG 1/0/4, already this interface SLAVE MODE, and already PTP synced)
TenGigabitEthernet1/0/4 24 SLAVE (to GMC)

TwentyFiveGigE1/1/1 24 MASTER (to 2nd Sw)

1-Mgmt-sw-9300#sh ptp parent
PTP PARENT PROPERTIES
Parent Clock:
Parent Clock Identity: 0x84:C8:7:FF:FE:5F:7E:40
Parent Port Number: 2
Observed Parent Offset (log variance): 17258
Observed Parent Clock Phase Change Rate: N/A

Grandmaster Clock:
Grandmaster Clock Identity: 0x84:C8:7:FF:FE:5F:7E:40
Grandmaster Clock Quality:
Class: 6
Accuracy: Within 100ns
Offset (log variance): 20061
Priority1: 128
Priority2: 118

1-Mgmt-sw-9300#show platform software fed switch active ptp domain
Displaying data for domain number 24
=======================================

Profile Type : DEFAULT
Profile State: enabled
Clock Mode : BOUNDARY CLOCK
Delay Mechanism: : END-TO-END
PTP clock : 2024-5-26 16:19:15
mean_path_delay 86 nanoseconds
Transport Method : 802.3
Message general ip dscp : 59
Message event ip dscp : 59

1st Cisco is connected with fiber to 2nd Cisco 9300 (twenG 1/1/1, interface mode UNCALIBRATED)

2-9300-new#sh ptp br | inc TwentyFiveGigE
TwentyFiveGigE1/1/1 24 UNCALIBRATED (to 1st sw)
TwentyFiveGigE1/1/2 24 MASTER
TwentyFiveGigE1/1/3 24 MASTER
TwentyFiveGigE1/1/4 24 MASTER
TwentyFiveGigE1/1/5 24 MASTER (to 3rd sw)

2-Mgmt-9300-new#sh ptp parent
PTP PARENT PROPERTIES
Parent Clock:
Parent Clock Identity: 0x64:8F:3E:FF:FE:B2:14:0
Parent Port Number: 57
Observed Parent Offset (log variance): 17258
Observed Parent Clock Phase Change Rate: N/A

Grandmaster Clock:
Grandmaster Clock Identity: 0x84:C8:7:FF:FE:5F:7E:40
Grandmaster Clock Quality:
Class: 6
Accuracy: Within 100ns
Offset (log variance): 20061
Priority1: 128
Priority2: 118

2-Mgmt-9300-new#show platform software fed switch active ptp domain
Displaying data for domain number 24
=======================================

Profile Type : DEFAULT
Profile State: enabled
Clock Mode : BOUNDARY CLOCK
Delay Mechanism: : END-TO-END
PTP clock : 1970-1-2 15:15:44
mean_path_delay 0 nanoseconds
Transport Method : 802.3
Message general ip dscp : 47
Message event ip dscp : 59

2nd Cisco is connected with fiber to 3rd Cisco 9300 (twenG 1/1/1, interface mode already SLAVE mode)

3-Sw-9300#sh ptp brief | inc TwentyFiveGigE1/1/1
TwentyFiveGigE1/1/1 24 SLAVE

3-Sw-9300#sh ptp parent
PTP PARENT PROPERTIES
Parent Clock:
Parent Clock Identity: 0x4C:EC:F:FF:FE:B:64:0
Parent Port Number: 61
Observed Parent Offset (log variance): 17258
Observed Parent Clock Phase Change Rate: N/A

Grandmaster Clock:
Grandmaster Clock Identity: 0x84:C8:7:FF:FE:5F:7E:40
Grandmaster Clock Quality:
Class: 6
Accuracy: Within 100ns
Offset (log variance): 20061
Priority1: 128
Priority2: 118

3-Sw-9300#show platform software fed switch active ptp domain
Displaying data for domain number 24
=======================================

Profile Type : DEFAULT
Profile State: enabled
Clock Mode : BOUNDARY CLOCK
Delay Mechanism: : END-TO-END
PTP clock : 1970-1-2 15:12:42
mean_path_delay 9254 nanoseconds
Transport Method : 802.3
Message general ip dscp : 59
Message event ip dscp : 47

[marce1000]

 -   Following bugs like these : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvh88082
                                               https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf81913

                                             Use latest advisory software version and check if that can help :
                       https://software.cisco.com/download/home/286313851/type/282046477/release/Cupertino-17.9.5

 M.
                                               

[bseklecki]

This is a CATALYST 9300 or a CATALYST IE-9300 ? The 25gb / TwentyFiveGigE probably indicates the former?

Did you resolve this issue?