08-16-2011 02:19 PM - edited 03-07-2019 01:44 AM
I have a requirement to tag all voice traffic to the wan as DSCP field in the IP header set to ef (decimal 46).
i am currently running auto qos on the switches which are also facing the wan.
how do mark my voice traffic as such?
Do I need this on all interfaces:
auto qos voip trust
mls qos trust dscp (or cos)
or only on the phone server interfaces?
what about the interface facing the wan?
08-19-2011 05:31 AM
Hi,
This might help.
http://www.cisco.com/en/US/tech/tk543/tk759/technologies_white_paper09186a00801348bc.shtml#wp39428
Thanks
Ajay
09-11-2011 09:36 AM
I have found the following, does that make sense:
access-list 10 permit ip 192.168.100.0 255.255.255.0
access-list 10 permit ip 192.168.110.0 255.255.255.0
class-map match-all permium
match access-group 10
match ip dscp 46
now i can 'capture' the traffic and categories it as dscp46 but how do i apply it?
note that the vlans above are all my phones
09-11-2011 09:44 AM
Hi,
packets with a src IP of 192.168.100.x or 192.168.110.x and a DSCP value of 46 will be matched in this class-map.
Now to make an action to these packets you must use a policy-map:
policy-map premium
class premium
Then apply the policy to interface with service-policy command:
int fx/x
service-policy premium out
Regards.
Alain.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: