Resetting 2950c Switch

[jackson282]

Have a 2950 switch that was configured by another company. Need to change IP address. Tried resetting the switch via documentation but when pressing the mode button switch led's do not blink. Have done this on other 2950 and 2960 switches without a hitch. Any suggestions on how to reset.

[ankbhasi]

Hi Jack,

WHY don't you just delete the running config and do "wr mem" and then reload the switch.

Ankur

[amit-singh]

Hi,

If you are able to login to the switch and you want to change the switch to factory defualts, do the following:

erase nvram:

reload

Let us know if you have any other question.

HTH,

-amit singh