Send device hostname in trap message

[umeshunited]

I want to send device hostname in trap message. Right now hostname column shows IP address. I want it to reflect device hostname. I tried "logging origin-id hostname" but it did not work. I also tried "logging origin-id string SWITCH1" but no luck

I am having 3650 and running 16.6.5 code.

Below is the show run | in logging output

logging buffered 10000000
no logging console
no logging monitor
hw-switch switch 1 logging onboard message
logging origin-id string SWITCH1
logging host X.X.X.X transport udp port 1000
logging host X.X.X.X transport udp port 10514
logging host X.X.X.X transport udp port 27514
logging host X.X.X.X

[balaji.bandi]

we have seen some old IOS send only IP address and i need to map the information inside syslog mapping host with IP to resolve.

can have your IOS version ?

[umeshunited · Accepted solution]

Sorry, Balaji for the delayed response.

I added host entry on the Solarwinds server and then that name was reflecting in the DNS field of the node details.

And I am also getting the hostname in the SNMP trap email alert.

Thanks.

[balaji.bandi]

Glad it was working, can you mark as post as solved, so the solution can be used for other community members.

[Deepak Kumar]

Hi,

The configuration seems correct and I am happy that you had resolved your issue. 

[jewfcb001]

logging origin-id string SWITCH1
Is this command is logging or snmp trap ?