11-20-2017 11:59 AM - edited 03-08-2019 12:48 PM
hi
i have a WS-C3850-48XS with ipservices license and SW version 3.07.04E and a WS-C3850-12XS ipbase license and SW version 16.6.2. I am planning to stack these two with 48xs has switch 1 and 12xs as switch 2 and also upgrade the 48XS to 16.6.2. Can you let me know if this would work ? if not can you make me any suggestions to make it work.
Karthik
Solved! Go to Solution.
11-20-2017 12:25 PM
Hi,
The 48 port does not support stacking.
Have a look:
The following switch models do not support StackWise-480:
WS-C3850-48XS-S
WS-C3850-48XS-E
WS-C3850-48XS-F-S
WS-C3850-48XS-F-E
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/hardware/installation/guide/b_c3850_hig/b_c3850_hig_chapter_010.html11-20-2017 12:25 PM
Hi,
The 48 port does not support stacking.
Have a look:
The following switch models do not support StackWise-480:
WS-C3850-48XS-S
WS-C3850-48XS-E
WS-C3850-48XS-F-S
WS-C3850-48XS-F-E
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/hardware/installation/guide/b_c3850_hig/b_c3850_hig_chapter_010.html11-20-2017 01:11 PM
thanks for the information
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: