I just barely put in a Cisco 3925 on our network. I've configured gigabitethernet 0/2 to live on our management VLAN with an IP address of 10.129.0.31/16. I did a "no shut" on the interface. Everything should be ready to allow me to ping and/or SSH to that interface but I can't. It's really weird because I've done this a thousand times (at least on ASAs). I must be missing something. At any rate, the default gateway of the management VLAN is 10.129.0.1. I can ping that from the router. I can also ping that from my laptop (which lives on a completely different VLAN). But I can't ping the router from my laptop or vice versa. Any help would be appreciated.
Building configuration...
Current configuration : 1360 bytes
!
! Last configuration change at 19:05:13 UTC Thu Jan 10 2013
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname border01
!
boot-start-marker
boot-end-marker
!
enable password 7 12091D1808010F542872702625
!
no aaa new-model
!
!
no ipv6 cef
ip source-route
!
!
ip cef
!
!
no ip domain lookup
ip domain name blah blah
!
multilink bundle-name authenticated
!
!
!
!
!
!
username dengel privilege 15 password 7 121815051B072E112D737D7963
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/2
ip address 10.129.0.31 255.255.0.0
ip access-group 100 in
duplex auto
speed auto
!
interface GigabitEthernet0/3
no ip address
shutdown
duplex auto
speed auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
access-list 100 permit tcp any any
access-list 100 permit icmp any any
!
!
!
!
!
!
control-plane
!
!
line con 0
password 7 051B1E003B464D591B5C431C1D
line aux 0
line vty 0 4
privilege level 15
login
transport input ssh
line vty 5 924
privilege level 15
login
transport input ssh
!
scheduler allocate 20000 1000
end
