11-12-2015 04:57 AM - edited 03-08-2019 02:40 AM
we have installed the switch and wireless lan conctroller and enter management IP, how to uninstall the switch and wireless lan controller as we need to return this switch and WLC to our vendor
11-12-2015 05:47 AM
What do you mean by installed?
Please rate useful posts and mark answers as correct if applicable.
11-15-2015 11:36 PM
Dear expert, I can only delete startup config, but I want to delete running config as well, how to do?
11-16-2015 01:19 AM
if you delete the startup config as Genesh provided and reload the switch there is no running-config left to load
11-12-2015 07:50 AM
we have installed the switch and wireless lan conctroller and enter management IP, how to uninstall the switch and wireless lan controller as we need to return this switch and WLC to our vendor
Hello Petercinvest,
Do you mean to make it fresh switch by stating Uninstall , If yes then do write erase or erase startup-config on switch and then reload.
for WLC Use the reset system command.
Hope it Helpss.
-GI
Rate if it Helps..
11-12-2015 08:03 AM
This doesn't delete the vlans on the switch. You will need to do a "delete vlan.dat" command to remove them.
Please rate useful posts and mark answers as correct if applicable.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide