cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
20454
Views
5
Helpful
3
Replies

Upgrade IOS-XE on Cisco 9300 stack

giangle
Level 1
Level 1

Hi all

I am using 2 Cat 9300 and configured stackwise 480 for it. Now, I want to upgrade IOS-XE from 16.06.03 to 16.06.05 for it. I read this document from link https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-6/configuration_guide/sys_mgmt/b_166_sys_mgmt_9300_cg/b_166_sys_mgmt_9300_cg_chapter_01.html.

I wonder, I can use this document (command: install add, install active, install commit) to upgrade for stack switch Cat 9300 ?

Please help me. Thanks

 

Regards,

Giang Le

1 Accepted Solution

Accepted Solutions

Hi,

you can try below guide. even it is for a 3850, it should work for 9300

https://www.rogerperkin.co.uk/cisco/switching/3850/upgrade-software-cisco-3850-switch/
Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

View solution in original post

3 Replies 3

Hi,

you can try below guide. even it is for a 3850, it should work for 9300

https://www.rogerperkin.co.uk/cisco/switching/3850/upgrade-software-cisco-3850-switch/
Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB