Upgrade IOS-XE on Cisco 9300 stack

[giangle]

Hi all

I am using 2 Cat 9300 and configured stackwise 480 for it. Now, I want to upgrade IOS-XE from 16.06.03 to 16.06.05 for it. I read this document from link https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-6/configuration_guide/sys_mgmt/b_166_sys_mgmt_9300_cg/b_166_sys_mgmt_9300_cg_chapter_01.html.

I wonder, I can use this document (command: install add, install active, install commit) to upgrade for stack switch Cat 9300 ?

Please help me. Thanks

Regards,

Giang Le

[Kasun Bandara · Accepted solution]

Hi,

you can try below guide. even it is for a 3850, it should work for 9300

https://www.rogerperkin.co.uk/cisco/switching/3850/upgrade-software-cisco-3850-switch/

[giangle]

Hi Kasun Bandara
I upgraded Switch Stack by this link, https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-6/configuration_guide/sys_mgmt/b_166_sys_mgmt_9300_cg/b_166_sys_mgmt_9300_cg_chapter_01.html
It's ok for standalone switch and stack switch
Thanks,
Giang Le

[ranjit123]

Hello All,

The correct process needs to be below

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/software/release/16-10/release_notes/ol-16-10-9200.html#id_67613

Regards,