Verifying the md5 from a new IOS(-XE) image

[Harrie Hendriks]

Where I can find the MD5 checksum, generated from Cisco for a new IOS image so that I can verify the output what I found with the verify /md5 command.

For example:

verify /md5 (bootdisk:s2t54-adventerprisek9-mz.SPA.151-2.SY10.bin) = 89fdada50cad5414b0d1062b4589feec

But where can I find if this is the correct checksum.

[Syed · Accepted solution]

Hi,

Find the attached screenshot for reference.