03-03-2014 04:45 AM - edited 03-07-2019 06:29 PM
Hi guyz,
I am facing an issue i just install a 2950 series switch run Version 12.1(22)EA4 in my network, i configured the vtp version 1 as clinet mode and change VTP domain name to my current domain name....Trunk is up but no VLAN transfer i already done some troubleshooting adding vlan on VTP server to change its revision number but still same no vlan
Client vtp status:
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 64
Number of existing VLANs : 5
VTP Operating Mode : Client
VTP Domain Name : local
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x24 0xDA 0x7C 0x1F 0x01 0x3C 0xD6 0xCD
Server VTP status:
VTP Version capable : 1 to 3
VTP version running : 1
VTP Domain Name : local
VTP Pruning Mode : Disabled
VTP Traps Generation : Enabled
Device ID : e4c7.22a9.edc0
Feature VLAN:
--------------
VTP Operating Mode : Server
Maximum VLANs supported locally : 1005
Number of existing VLANs : 14
Configuration Revision : 21
MD5 digest : 0xA2 0x9B 0x4F 0xB6 0x58 0x78 0xFB 0x89
0xF7 0x61 0xF2 0x7B 0x55 0x5A 0xFF 0xD0
Trunking is up as command on client switch
Date-SW#sh int trunk
Port Mode Encapsulation Status Native vlan
Fa0/24 desirable 802.1q trunking 1
Port Vlans allowed on trunk
Fa0/24 1-4094
Port Vlans allowed and active in management domain
Fa0/24 1
Port Vlans in spanning tree forwarding state and not pruned
Fa0/24 1
Solved! Go to Solution.
03-03-2014 08:23 AM
Zohaib,
Was is it a vtp password issue?
03-06-2014 12:07 AM
yes
12-11-2017 02:40 AM
I also faced the same issue,initially my switch was in Client mode then not update VLAN database i tried all but no success.Then finally changed it to Transparent Mode and then its start working and VLAN also updated .I want to know the reason for these why it didn't work in Client Mode?
12-11-2017 02:57 AM
12-13-2017 11:46 PM
09-22-2021 11:49 PM
Is password is compulsory while making vtp server because i have just made vtp domain and modes on every switch , so is there any issue of password if not configured
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide