02-09-2019 10:22 AM - edited 03-08-2019 05:17 PM
I want to test the new zero touch provisioning feature on the 3850 or any IOS-XE 16.x.x Everest device. I can't seem to find a IOS-XEv image on VIRL and I can't find any documentation on how to test this in a virtual environment like GNS3. Any help is greatly appreciated.
02-09-2019 11:05 AM
Personally I do believe at this stage it is possible with GNS3 or EVE-NG
You can do if you have physical kit with APIC-EM, works like charm. or ZTP.
or wait for some other people have tried with their inputs.
02-09-2019 11:25 AM
Thanks BB, but I'm interested in virtual only. I don't have any physical switches or routers and would like to test it before purchasing the hardware, which is expensive.
02-09-2019 01:49 PM
All releases (classic IOS and IOS-XE) from July 2018, Zero Touch has been permanently disabled. The command "vstack" is no longer allowed.
02-10-2019 09:37 AM
02-10-2019 12:20 PM
@exd42062 wrote:
I don't believe that it has been disabled. This feature is advertised for the new 9000 series Catalyst switches. The feature was released in IOS-XE 16.5.x Everest. It is a shame if you can't test it in a virtual environment.
If that is the case, then this is probably the new Zero Touch Provisioning that requires DNAc.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide