Resolved! root password and enable sslv3 on mxp
Couple things ..1. What is the root password on an MXP series device ??? 2. How does one disable sslv2 and enable sslv3 on an mxp device ?? Thank you.
Couple things ..1. What is the root password on an MXP series device ??? 2. How does one disable sslv2 and enable sslv3 on an mxp device ?? Thank you.
Is there published specs for how long we can extend the Table Mic 60? (CTS-MIC-TABL60)Looks like it has a 9m cable attached, and the extension cable is also 9m - CAB-MIC-T60EXT. My question is how many of the extension cables can we string together....
Hi, Can I authorize one particular user to connect to only one particular endpoint in Jabber video for Telepresence ?
Hello, I am facing an issue when trying to login using webRTC to CMS (users already imported)this issue does not appear using cisco meeting app. Any help would be appreciated Note that dns is configured on CMS and running successfully. Best Regards,
The question is if a room device can be the owner of a Personal multiparty license. The idea is assign a PMP license to a room endpoint when this endpoint call to a Meeting server space.Thanks in advance
We have a CMS users that are using *@coman.com.co domain, but we need convert this domain to another domain to route (differentiate) the calls from CUCM.In Theory, the CUCM should have *@coman.com.co and the CMS user should have *@device.coman.com.co...
I am having an issue running xStatus commands from the sx20 web interface. I keep getting a message saying the command was rejected. I am able to run xCommand and xConfig without issue. Has anyone else run into this?
Hi, I have recently deployed CUCM 11.5 with Expressway-C & E with CMS and have a couple Telepresnence Video systems registered to CUCM. Directory numbers have been associated to the units and units are registered. when attempting to dial the DN i re...
HiI have a critical strange Issue in my VoIP network.we have ISR 4351/K9 Router with ISO isr4300-universalk9.03.16.05.S.155-3.S5-ext.SPA.binwe have CUCM 11.5 an we are using E1 linethe problem is 1st call is successfully establised but when we dial a...
Hello, Years ago I implemented a VCS Control and a VCS Expressway. Over the years I upgraded them from x6.x to x8.7. In the Trusted CA Certificate Store (Maintenance --> Security certificates --> Trusted CA certificate) are round about 140 public ca...
We have Adobe connect version 9.0VCS running X8.5.1I have a good sip trunk from my VCS to the Adobe Connect server.I believe the Adobe connect server is connected to the VCS from the Adobe connect server as we have set up the AMG with sip Profile inf...
RUNNING WINDOWS 10JAVA 1.8.0.144TMS 15.4.4Using IE 11 (can't use any other browser) Just upgraded my PC from Windows 7 to Windows 10 .. Now I am unable to open the Conference Center ... getting the JAVA support has not been detected warning. ??? I...
Hi, I am trying to use the scheduling mailbox feature in TMSXE 5.5 and have 10 ports reserved for video call type on each protocol, however, when I attempt to use that mailbox as a resource in Outlook meeting, I get a response from TMS stating with ...
I have an installation where I need to use the new Cisco touch 10 In Room Control to create a custom interface. I have 8 mics going directly to an SX80 and need to be able to mute 6 of the 8 mics independently of the remaining 2. Has anyone successfu...
hi the CTS-PHD1080P12XS2 PrecisionHD Camera 1080p12x is supported on SX80 codec. i've one sx80 witch speaker track and think buy a 3th camera CTS-PHD1080P12XS2 but no found document to support this camera on SX80.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-01-2024 08:17 AM | ||
09-28-2024 08:06 PM | ||
09-24-2024 02:13 AM | ||
09-19-2024 12:06 PM | ||
09-09-2024 06:26 AM |
User | Count |
---|---|
3 | |
3 | |
1 | |
1 | |
1 |