05-07-2019 06:40 AM
Hi All
I have a codec SX80 with a camera precision 60, is connected as Installation guide show it. but I cannot control the camera via web. My Config is(See the image attached):
Could you help me told me that I need to control the camera via web?
05-07-2019 07:00 AM
Do you have speaker track or presenter track enabled? Usually you cannot manually control the camera if those are turned on.
05-07-2019 09:06 AM
Hi Mike
the codec is just connected to camera and touch10.
05-07-2019 09:36 AM
05-09-2019 09:08 AM
Hi Mike
I did the changes but the issue continues.
05-09-2019 08:17 AM
Can you control the camera from the Touch 10? If not, do you have the Ethernet cable connected between the camera and one of the peripheral Ethernet ports on the SX80? Also, what software version are you running?
05-13-2019 06:03 AM
Hi PMjack
Yes I can control the camera with the touch10, but I need control it via web.
05-13-2019 05:56 PM
I am guessing that your issue isn't that you can't control the camera, but is that you just can't see on the web interface what the camera is pointing at.
If you click on the arrows and zoom buttons on the web interface, the camera will likely move.
You can't see what the camera is pointing at as you possibly don't have a "Remote Monitoring" Option Key installed on to your endpoint.
Please remember to mark helpful responses and to set your question as answered if appropriate.
05-14-2019 01:09 PM
Hi Wayne
and How Can I get this option "remote control"?
05-14-2019 04:38 PM
The "Remote Monitoring" Option Key is an additional licence that you will need to purchase for any endpoint which you wish to be able to see the cameras in the web interface.
You would purchase this through your normal Cisco purchase methods.
There is a section on Remote Monitoring on page 212 of the SX80 Admin Guide.
Please remember to mark helpful responses and to set your question as answered if appropriate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide